Clear Gorilla Glue 1.75oz bottles and 3g minis are flexible, fast-setting, crystal clear contact adhesives that create a strong, permanent bond. Gorilla Glue Clear is water resistant making it great for projects both inside and out. Build, create, repair®! What is the difference between Clear Gorilla Glue and Gorilla Super Glue? Gorilla Super Glue is designed to dry fast and works best with tight fitting joints. It’s perfect for a fix you need done fast. Clear Gorilla Glue offers an extended working time, which allows you to reposition your project. It is also minimally gap filling, which allows you to glue uneven surfaces. Is Clear Gorilla Glue waterproof? Clear Gorilla Glue is water resistant, and can withstand intermittent exposures, however is not meant for a constant soak. Original or White Gorilla Glue are 100% waterproof and can withstand soaking and longer term water exposure, assuming the materials being are not significantly affected by the water. How do I maximize the shelf life of Clear Gorilla Glue? After use, wipe the nozzle with a dry cloth, close cap tightly and store at room temperature with access to light, if possible. Lack of light and heat can cause product to yellow. Cured glue can be removed from work surface with chisel, scraper or sandpaper. How to Get the Best Results from Your Clear Gorilla Glue 1. All surfaces should be clean and free of dirt, grease and oil. Best if used between 50°F and 90°F. Clear should only be used in a well-ventilated area. 2. Apply adhesive to each surface to be bonded. To maximize bond strength: Wait approximately two minutes for adhesive to partially dry before joining surfaces. 3. Press surfaces firmly together. NOTE: Bond forms immediately and can be difficult to reposition. Cure Time: Allow for a minimum of 24 hours for full cure. Cure time may increase with lower temperatures and when used on non-porous surfaces. Storage Tips: After each use, wipe nozzle with a dry cloth and tightly replace cap. Store in a cool, dry location. Tip: For easier re-opening, apply a thin coat of petroleum jelly to the threads before replacing cap. Store away from children and animals. Clean-up: Wipe uncured adhesive with a dry cloth and clean with acetone, isopropyl alcohol, or citrus based solvents according to manufacturer’s instructions. Cured adhesive may be removed by scraping from surface. Clear Gorilla Glue is not recommended for use on polystyrene, polypropylene or polyethylene products. Do not use on food-contact surfaces. Do not dry clean. May cause damage to finished surfaces.
